« previous next »
Pages: [1]   Go Down

Author Topic: Bulkhead panel replacement 1980.  (Read 515 times)

0 Members and 1 Guest are viewing this topic.

ZJ0904

  • Standard
  • Registered Member
  • Offline
  • *
  • 6
  • Location: NSW
Bulkhead panel replacement 1980.
« on: March 06, 2019, 08:05:56 PM »
Hi

I need a left hand bulkhead end to suit a 1980 Moke. This is the model that doesn’t have the outer windscreen reinforcement panel as you know. The PO decided to weld in the angled seam and bog it for a smooth look. Luckily they didn't do the right hand side after making a complete hash of it. After seeing some replacement panels available online would I need the inner bulkhead replacement panel then weld the windscreen support piece (the small strip of angle) to it or is there a specific panel for the late model Mokes available?








Logged

Terry

  • Custodian
  • Registered Member
  • Offline
  • ***
  • Serial Moke Offender
  • 16246
  • Location: Melbourne
Re: Bulkhead panel replacement 1980.
« Reply #1 on: March 06, 2019, 09:32:16 PM »
Hi,

on the 1980 Mokes that piece was not fitted and the windscreen frame went all the way down to the guard.

Do you have a picture of the windscreen frame that you have, maybe it is the earlier style giving you the idea that picture panel s missing.

Terry
Logged

ZJ0904

  • Standard
  • Registered Member
  • Offline
  • *
  • 6
  • Location: NSW
Re: Bulkhead panel replacement 1980.
« Reply #2 on: March 06, 2019, 10:03:57 PM »
The windscreen goes all the way to the Botton as it should. I haven't removed any panels as yet.
I think the description listed on the minisport website may be incorrect or misleading. The one I originally listed looks to be the inner panel that the outer one is welded too.
Here's a pic of the 2 together. The outer one as you said isn't fitted to the 1980 model.


Logged
Pages: [1]   Go Up
« previous next »