austmoke

Author Topic: Roll Bar dimensions  (Read 109 times)

0 Members and 1 Guest are viewing this topic.

sparrow

  • Standard
  • Registered Member

  • Offline
  • *

  • 5
  • Location: Hervey Bay
Roll Bar dimensions
« on: March 11, 2019, 06:17:16 PM »
Hi all i am trying to find the dimensions for a roll bar for a 1975 Moke that I am currently restoring. If any one can help it would be greatly appreciated. Regards Heather

Terry

  • Custodian
  • Registered Member

  • Offline
  • ***
  • Serial Moke Offender

  • 15208
  • Location: Melbourne
Re: Roll Bar dimensions
« Reply #1 on: March 11, 2019, 07:08:36 PM »
Hi,

there was no factory fitted roll bar for 1975 Mokes so not sure what measurements you are looking for.

Do you have a picture of the roll bar you are wanting to fit?

Terry
Cujo. 1999 - 2016

yellaterra

  • Standard
  • Registered Member

  • Offline
  • *

  • 101
  • Location: Geelong
Re: Roll Bar dimensions
« Reply #2 on: March 11, 2019, 07:39:43 PM »
Hi Heather,   In reference to rollbars and rollcages, adr regs Lk8, Lk9 current regs for new rollbars are 51mm for main hoops, cold rolled seamless pipe. Crossbars and support bars are 30mm, cold rolled seamless pipe.  These are the requirements for new rollbars. Earlier bars from mokes can be fitted but you would have to notify your insurance company for agreement, if your moke did not have one originally fitted.

yellaterra

  • Standard
  • Registered Member

  • Offline
  • *

  • 101
  • Location: Geelong
Re: Roll Bar dimensions
« Reply #3 on: March 11, 2019, 07:44:31 PM »
Also, if you have one made new,  the welding has to be performed by a certified welder.

Drakman

  • Standard
  • Registered Member

  • Offline
  • *

  • 210
  • Location: Mostly Maroochydore
Re: Roll Bar dimensions
« Reply #4 on: March 11, 2019, 08:20:40 PM »
Hi Heather,  I have a 1977 Moke with what i believe is a later model roll bar fitted.  It has triangular mounts at the front and the inertia reel for the seat belts bolts on to the mount.



Let me know if you want the dimensions.