2

Author Topic: Moke Windscreen Wiper Pivot Seals...do they exist?  (Read 226 times)

0 Members and 1 Guest are viewing this topic.

Gizmo.7000

  • Standard
  • Registered Member

  • Offline
  • *

  • 66
  • Location: Mid North
Moke Windscreen Wiper Pivot Seals...do they exist?
« on: June 07, 2018, 09:20:24 AM »
Hi Guys,

I am getting ready to do a few parts orders and need to know if there are any rubber seals needed on the Windscreen Wiper Pivots where they go through the front body?

I have done some searches, but not sure if they are actually required, or ever existed, or are part of the pivot itself?

Cheers

Gizmo
« Last Edit: June 08, 2018, 09:34:51 AM by Gizmo.7000 »

moemoke

  • Custodian
  • Registered Member

  • Offline
  • ***

  • 5138
  • Personal Text
    Moe, Victoria
Re: Moke Windscreen Pivot Seals...do they exist?
« Reply #1 on: June 07, 2018, 12:44:52 PM »
Mokes don't normally have pivots on the windscreen so I'm not sure what you mean.

There are some that people have modified with folding windscreens, maybe you have one of these.

Are you able to post a photo of what you have?
1976 Moke 1275cc (Dynky),
1976 Moke(Scarlet) current project,
1974 Moke with Suzuki GTI motor (project), 
1975 Moke rust bucket,
1967 Moke rust bucket

Gizmo.7000

  • Standard
  • Registered Member

  • Offline
  • *

  • 66
  • Location: Mid North
Re: Moke Windscreen Pivot Seals...do they exist?
« Reply #2 on: June 08, 2018, 09:35:30 AM »
Mokes don't normally have pivots on the windscreen so I'm not sure what you mean.

There are some that people have modified with folding windscreens, maybe you have one of these.

Are you able to post a photo of what you have?

G'day Moemoke...sorry mate I meant Windscreen WIPER pivot seals, I had a brain lapse when posting this thread!

Pete Power

  • Standard
  • Registered Member

  • Offline
  • *
  • MIGHTY MOKE

  • 2820
  • Location: Adelaide S.A.
Re: Moke Windscreen Wiper Pivot Seals...do they exist?
« Reply #3 on: June 15, 2018, 03:27:59 PM »
I made those washers for the wipers, get a piece of 20mm (check size) x short handy holdable length around 6" of water pipe, grind a knife edge around one end to make yourself a wad punch, get some 1/8" insertion rubber. Grab a hammer and a bit of soft wood, place rubber on wood and use your new wad punch to cut out 2 perfect rubber discs. For the hole in the middle use the suitable size wad punch.
Happy Mokin
Regards
Pete

1981 Californian 1275 Galv "Mighty Moke"

"Just because you're breathing doesn't mean you're alive!"

Gizmo.7000

  • Standard
  • Registered Member

  • Offline
  • *

  • 66
  • Location: Mid North
Re: Moke Windscreen Wiper Pivot Seals...do they exist?
« Reply #4 on: June 16, 2018, 07:37:28 PM »
Thanks Pete