Author Topic: Assembling disc breaks  (Read 165 times)

0 Members and 1 Guest are viewing this topic.

Braves63

  • Standard
  • Registered Member

  • Offline
  • *

  • 53
Assembling disc breaks
« on: January 15, 2019, 04:12:13 PM »
Does anyone know of a step by step guide to assembling the disc break kits?
this is the kit i brought
http://www.minispares.com/product/Classic/Brakes/Front/C-AJJ4028A.aspx?0401&ReturnUrl=/shop/classic/Brakes/Brake~Kits.aspx|Back%20to%20shop

Halfpint

  • Forum Support Group
  • Registered Member

  • Offline
  • ***
  • MOKE Pilot

  • 3868
  • Personal Text
    It's not where you go, it's how you get there !
  • Location: N/E Vic. Australia
Re: Assembling disc breaks
« Reply #1 on: January 15, 2019, 08:56:10 PM »
Hi,
It might look a bit daunting with so many components, but once you separate the parts for each side, and start building one side, it will all fall into place.
I'd suggest you start by building both top and bottom ball joints onto the hubs.
They are nice kits  ;)
HP
Experiencing the Baader-Meinhof phenomenon.
"As a Moke owner, you have a heightened awareness of Mokes in your environment, they were always there." 

https://www.mokeforum.com.au/index.php?topic=4727.msg161920#msg161920

M.Aziz

  • Standard
  • Registered Member

  • Offline
  • *

  • 102
  • Location: Canterbury
Re: Assembling disc breaks
« Reply #2 on: January 15, 2019, 11:00:19 PM »
I found these videos to be quite helpful and just about the only ones you will need to reference along with torque specs.
Cheers,
Mus
https://www.youtube.com/watch?v=sTQYPJ7dICI
https://www.youtube.com/watch?v=i5xdnMC9mjg

Pete74

  • Standard
  • Registered Member

  • Offline
  • *

  • 56
  • Location: Seaford rise south a
Re: Assembling disc breaks
« Reply #3 on: January 25, 2019, 07:48:06 PM »
Hi Braves.
I recently assembled and fitted a set to my moke. No instructions just found an online explodes diagram and used that as a guide. There is a torque steeting sheet I found i think from mokeworx that gave the required settings. I found it pretty straight forward. I'll try find the links for you tonight.

Pete74

  • Standard
  • Registered Member

  • Offline
  • *

  • 56
  • Location: Seaford rise south a