Author Topic: Help needed to identify part  (Read 141 times)

0 Members and 1 Guest are viewing this topic.

Foxy71

  • Standard
  • Registered Member

  • Offline
  • *

  • 9
  • Location: Beaumaris
Help needed to identify part
« on: June 08, 2020, 04:43:48 PM »
Good afternoon , In among a box of bits that came with my "swiss cheese" moke is a bar that extends and will return to its original position . It has a flat pivoting mount at each end . One end has 4 bolt holes the other has 2.  It is painted the same colour as the car

Terry

  • Custodian
  • Registered Member

  • Offline
  • ***
  • Serial Moke Offender

  • 15889
  • Location: Melbourne
Re: Help needed to identify part
« Reply #1 on: June 08, 2020, 05:01:24 PM »
Hi,

A picture would be helpful, but nothing in the description suggests it is anything from the factory that I can think off.

Terry
13: "I am the scariest number."
666: "No, I am the scariest number."
2020: "Hold my beer and watch this."

Cujo. 1999 - 2016

Foxy71

  • Standard
  • Registered Member

  • Offline
  • *

  • 9
  • Location: Beaumaris
Re: Help needed to identify part
« Reply #2 on: June 08, 2020, 06:26:32 PM »
Gday terry tried to post an image but couldn’t get the attachment to the post [/img]

Terry

  • Custodian
  • Registered Member

  • Offline
  • ***
  • Serial Moke Offender

  • 15889
  • Location: Melbourne
13: "I am the scariest number."
666: "No, I am the scariest number."
2020: "Hold my beer and watch this."

Cujo. 1999 - 2016