austmoke

Author Topic: Pedal box part  (Read 90 times)

0 Members and 1 Guest are viewing this topic.

Sharks

  • Standard
  • Registered Member

  • Offline
  • *

  • 96
  • Location: Bendigo
Pedal box part
« on: August 30, 2020, 02:21:13 PM »
Hi!

Slowly making progress on Dad's Gal Moke, putting bits back together again.
One part that's been left sitting in the floorwell is this one. I can recall that I took it out from somewhere around the pedalbox, but can't recall where it goes or what it does. Perhaps stops a pedal being pressed too far? If anybody can identify it, that would be greatly appreciated ;D



Thanks,
Sharks

winabbey

  • Standard
  • Registered Member

  • Offline
  • *

  • 267
  • Location: Melbourne
Re: Pedal box part
« Reply #1 on: August 30, 2020, 03:14:39 PM »
It's the accelerator pedal stop that attaches to the pedal box RH bolt.

You can buy NOS or just replace the scrappy piece with some leather or rubber.


« Last Edit: August 30, 2020, 03:17:11 PM by winabbey »

Sharks

  • Standard
  • Registered Member

  • Offline
  • *

  • 96
  • Location: Bendigo
Re: Pedal box part
« Reply #2 on: August 30, 2020, 03:37:08 PM »
Thanks a ton, Winabbey.

Will update on the progress of the Moke soon.